Without the right hydraulic pump, your hydraulic system will fail. You need to double check that the pump you choose will work with your system or you could risk damaging your equipment. When choosing the right ifp hydraulic pumps, there are a few things you should consider.
Consistent Loads: When you have a load that will be applied consistently, then a double acting pump or a single piston pump is a good choice. These types of loads are the simplest systems. When you have an inconsistent load, you might need to design a hydraulic system that is load sensing. Having a hydraulic system that is load sensing is recommended because the system will use less energy and the components of the system won’t be subject to as much wear and tear.
Varying Loads: For a load that varies, then a two-piston pump or a dual speed one is a good choice. If there is a cylinder that advances until it will come in contact with a load, this leads to a greater cutting or bending force and makes it necessary for the pump to alternate between two states.
Loads with Varying Directions: With a load with a varying direction, a four-way valve can be necessary because force is exerted in any direction.
The Right Pump for Your Cylinder: If you are choosing a hydraulic pump for a cylinder, then you need to consider how long the pump needs to be in order to extend the cylinder based on dimensions for a set period of time. If you need to extend the cylinder for three seconds with dimensions of 3.5 x 10 inches, then you need to find a pump that will pump the equivalent number of gallons per minute. There are several graphs you can use to determine the exact size you need. The other option is to choose a cylinder that has the right diameter to work with the pump. This may not be the best option because the size of the cylinder will be limited by the amount of force that your system needs.
The Right Motor for Your Pump: When choosing ifp hydraulic pumps, another consideration is the motor. Each pump needs to have a certain amount of horsepower. If the motor isn’t powerful enough to work the pump, then you could need a different motor or a different type of pump. The best part is that there is flexibility, so you will find a combination that creates a system that works for your needs.
Customize a Pump: Pumps can be customized for certain specifications. You could need a different seal, port type, or valve system. Choose a manufacturer to help you with your options. Note that it could be difficult to replace a part with a custom pump in the future.